Skip to product information
1 of 6

Block Docks

Regular price
$30.00 NZD
Regular price
Sale price
$30.00 NZD

The Block DockTM soap dish is made from aluminium and is powder-coated for a hardwearing finish. This clever storage solution is designed to drain quickly and to dry your bar fast - because air can reach all sides of it. Your bar will last longer and you'll get much more use from it. That's money in the bank because you will end up buying fewer bars - while also enjoying a better soap using experience. 

The Block DockTM safely stores all shapes, sizes and brands of bars and bars for every purpose. Stand your bar at the front of the Dock for stability when new, let it lean it to the back over time with use. These days nearly everything you habitually used in a bottle now comes as a bar. Thinking outside the bathroom is welcomed. 

This Block DockTM is WIDE size and weighs just 30 grams. It is 8.45cm wide, 5.6cm tall and 4.35cm deep. It fits bars up to 3.8cm in depth – the shortest side of your bar. 

As bars change in shape and volume with use, some manual adjustment within the Dock may be needed. Placing the bottom of the bar to the front of the Block DockTM and the top to the back will help ensure safest keeping. If your bar is a tight fit to begin with, just pinch the legs at the base together and it will pop up a little so you can more easily grab it. Soon enough it will slip in and out with ease.

Rectangular bars sit best when placed at the front of the Block DockTM when new. Bars that are extra wide, super long or very heavy are best cut in two before use.

The Block DockTM will keep your bar in good condition for use right to its very last sliver. When it’s that tiny, use it flat in your hand or piggy-back it onto your next bar when wet to avoid any waste.


A suction cup comes with each Block DockTM soap dish to enable vertical mounting. Wet the back with water to activate it. Be sure to locate your Block DockTM outside of direct water spray! 

The suction cup WILL adhere to glass, mirror, acrylic, vitreous china, steel and most genuinely smooth tiles. It will NOT adhere to textured tiles, paint etc because the suction cup cannot form the vacuum it needs to work. If this is your situation, it is best to suction to nearby glass. You can use a CommandTM brand water resistant strip or ScotchTM brand double-sided tape if it suits your surface. Additional holes in the back of the Block DockTM make it possible for you to thread a cable tie or stainless wire through for tying onto a shower rail or nearby fixture as an alternative. 

Detailed installation and care information will come with each Block DockTM including information for shower dome owners.

Using Block DockTM soap dishes come with the bonus of less time spent on bathroom cleaning! Just give the Block DockTM a wipe with your finger under the warm water when you shower. Completely dry it with your towel each week. It doesn’t get easier than that. Take care not to permeate its surface and never put your Block DockTM in the dishwasher - these actions will impact its lifespan. With your good care, your Block DockTM will give you many years of soap-saving service!

The Block DockTM soap dish was born in Riverton, Southland and is MADE IN NEW ZEALAND. Your Block DockTM has been boxed for ready for you by the terrific team at Southland disAbility Enterprises.